An O Scale Switching Layout

Helotes Switching Company Serving Helotes, Texas Industrial Area

Category: Kam Konnect

Entries about the Kam Konnect modular table system

Joining Modules Together

This photo shows how tightly the modules join together…Nice!

I use a T-Handle Allen wrench to lock the modules together. Rock solid!

Assembling The Modules

The legs are easily attached to the module with the included screws. The legs lock in the down position and can be easily released for folding up,

All screw holes are pre-drilled, Note the mechanism for locking the modules together. An Allan wrench, inserted in the hole in the top or bottom of the module is used to lock things tightly together.

A power drill is a necessity!

The legs fold up for transporting or storing.

 

A Modular Baseboard Table System

Kam Konnect – A Modular Baseboard Table System. Modules are dimensionally stable that will not warp or sag. Kam Konnect selects hard-woods while integrating plywoods that resist warping to allow heavier loads on top of modules. Kam Konnect modules won’t sag like a sway back mare. Kam Konnect modules rapidly & easily join other Kam Konnect modules using our patent pending method. This ability to join modules tightly together in three dimensions strengthens tables and joints such that proper track installations do not require rail joiners.

I am using two 30″ x 30″ modules  connected to two 30″ x 48″ ones with a 30″ x 30″ corner connector to form an “L” shaped layout.

Hardware for mounting the fold-down legs.

The four foot module in its shipping carton.